 |
|
||||||
|
|||||||
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
Warning: On choosing the right racing plug
- Generally, electrodes that project into the combustion chamber have better ignitability and have better performance. However, because of more exposure to high temperature combustion gases and because ground electrode becomes longer, heat resistance and durability decrease. The higher the level of tuning, the greater the need is to use a less projecting type.
- As the level of tuning is increased, so does the need for a higher heat range.
) |
IU01-□
･ Electrode Shape  ･ Height of plug 50mm ･ U-E |
RU01-□*
･ Electrode Shape
 ･ Height of plug 50mm ･ U-E(SURFACE) *RU01-□ are surface gap plugs, not ones with iridium center electrode and all-platinum ground electrodes. |
 |
||
) |
IXU01-□
･ Electrode Shape ･ Height of plug 51mm ･ XU-E |
|
|
||
) |
IRE01-□
･ Electrode Shape  ･ Height of plug 66mm ･ ROTARY ENGINE |
|
|
||
) |
IW01-□
･ Electrode Shape ･ Height of plug 56mm ･ W-E |
IW06-□
･ Electrode Shape ･ Height of plug 56mm ･ W-E(NON=RESISTOR) |
|
||
) |
IWM01-□
･ Electrode Shape ･ Height of plug 47.3mm ･ W-EM |
|
|
||
) |
IK01-□
･ Electrode Shape ･ Height of plug 50.5mm ･ ISO(SLANT ELECT) |
IK02-□
･ Electrode Shape ･ Height of plug 50.5mm ･ ISO(STRAIGHT ELECT) |
|
||
) |
IQ01-□
･ Electrode Shape ･ Height of plug 53mm ･ SLANT ELECT |
IQ02-□
･ Electrode Shape ･ Height of plug 53mm ･ STRAIGHT ELECT |
|
||
) |
IA01-□
･ Electrode Shape ･ Height of plug 27.6mm ･ Length of screw 22mm ･ FOR DETONATION COUNTER |
|
|
||
) |
IAE01-□
･ Electrode Shape ･ Height of plug 27.6mm ･ Length of screw 19mm ･ FOR W/OUT DETONATION COUNTER |
|
|
||
) |
IKH01-□
･ Electrode Shape ･ Height of plug 50.5mm ･ Length of screw 26.5mm ･ K-LONGREACH |
|
|
||
) |
IRL01-□
･ Electrode Shape ･ Height of plug 62mm ･ ROTARY ENGINE RX8 |
|
|
||
) |
IRT01-□
･ Electrode Shape ･ Height of plug 62mm ･ ROTARY ENGINE RX8 |
|
